|
|
#21 |
|
Пользователь
Житель форума
Регистрация: 23.11.2009
Адрес: Москва
Марка: Jeep JK Sahara 3.8 , 2008г
Сообщений: 395
|
При очередном поиске, нашел достаточно интересную информацию — пример установки.
http://mods.firebirdv6.com/msd/ -------------- THEORY OF OPERATION CAPACITIVE DISCHARGE The MSD Digital DIS Series Ignitions feature a capacitive discharge ignition design. The majority of stock ignitions are inductive ignitions. In an inductive ignition, the coil must store and step up the voltage to maximum strength in between each firing. At higher rpm, since there is less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy which results in a loss of power or top end miss. The MSD Ignition features a capacitor which is quickly charged to 460-480 volts and stores it until the ignition is triggered. With the CD design, the voltage sent to the coil is always at full power even at high rpm --------------- Spark Plugs: Choosing the correct spark plug design and heat range is important when trying to get the best performance possible. Since there are so many engine combinations and manufacturers, MSD does not recommend which plug or gap is exactly right for your application. Platinum style spark plugs are not recommended. MSD suggests that you follow the engine builder or manufacturer’s specification for spark plugs. With that, you can then experiment with the plug gap to obtain the best performance. The gap of the plugs can be opened in 0.005” increments, then tested until the best performance is obtained. MSD judges the plug gap by compression and other variables. Every application is different and should be tested and tuned. ------------- https://a.d-cd.net/ecfe524s-960.jpg ------------- Посмотреть видео на YouTube |
|
|
|