В английском мануале нашел такой текст;
(1) Use a dial indicator to measure the lateral
movement of the valve stem (stem-to-guide clearance).
This must be done with the valve installed in
its guide and just off the valve seat (Fig. 18).
(2) Correct clearance is 0.025-0.0762 mm
(0.001-0.003 inch). If indicated movement exceeds the
specification ream the valve guide to accommodate
an oversize valve stem.
Получается что предел, это 8 соток!!!
Где можно купить ремонтные клапана?
Последний раз редактировалось sali_s; 11.04.2015 в 09:19.
|